How To Upload To Your Teams Directory
Tutorial Part II

You should not have to reset any other settings within the program.  The factory default settings will work fine for you.  If you are working behind a company firewall you may have to go to the advance setup and correct the firewall settings.  Click OK to Start Your file transfer session.  Remember:  Entries are case-sensitive.  You must  enter data exactly as in your handout.

Once you have connected to the remote server, fossilparkbaseball.org, you will notice two screens.  The screen on the left is your computer with drive and directory listings.  The screen on the right is the directory on the remote server. In the middle of the screen make sure that the bullet selection is set to Binary.  This is usually the default setting.  If you know the path to your files you may type it in the field shown where the mouse points in the above image.  This field will also keep selections in memory for future use.

You may use the window as you would in normal folder windows to search for the directory where your files are stored.  Navigate your way to the desired directory by double clicking your left mouse button on the folders.

Once you have  the desired directory and its' contents in the screen view, you are now ready to select the desired files for upload.  You can select all the files by holding down your left mouse button and dragging a rectangle around the files to hi-light them or select individual files by holding down the <ctrl> key and left clicking individual files as shown above.  This way you can select the files you want and skip others.  Once you have selected the files you wish to upload, you will find two arrows in the center between the two screens.  One points to the remote server and the other to your computer.  Depress the button directing to the remote server to begin transferring files.  You will notice the transfer progress being recorded in the gray screen area and when the transfer is done you will see transfer complete in the lower portion of the main screen.  Upon completing the task depress the close button and exit.  That's all there is to it...fast, simple and easy.